Model #2: Revell F4U-4 Corsair 1:48

The Vought F4U is one of the most distinct planes of the WWII era and its striking lines make it hard to pass up for hobbyists. The inverted gull wings make the F4U easy to pick out from a mile away. The plane's significance as an integral part of Pappy Boyington's famed Black Sheep squadron makes this an irresistible candidate for a scale model build.

Every little boy knows the Revell name, and the reason why was obvious as soon as I opened the box. The parts were easy to identify on the sprue and the directions were clear. The design was complicated compared to my previous model, but the manageable size made this project far more enjoyable to put together.

One of the cool things about this model was the true-to-life folding wings. Unfortunately, I couldn't make mine work. Despite the overall quality of the model, the "hinges" for the wings were inadequate and unaligned. The tapered fit between the wing and fuselage didn't work either. After a ton of sanding and cutting, I was able to make them work (fold up and down). That said, the design was so flimsy, after a few rotations, both wings ended up breaking off.

I suspect a more experienced modeler would have been more successful, but that wasn't the case with me.

Here you can see my original (cutting) efforts at creating clearance for the wings to oscillate, and also the final solution of heavy glue to keep them attached to the rest of the model:

Although seemingly as delicate as the wing joints, the operable doors for the tailwheel are still working spot on. The wheel (and hook) both operate with a full range of motion and can be stowed away:

I also had a problem with the canopy. There was simply no way for this to fit. It either fit one half of the cockpit with a gap on the other (starboard) side, or it smooshed down on the pilots head and fell underneath the airframe. Luckily, I had picked up some of Testors clear parts cement and I was able to fill it in. Not a bad fix for a second timer!

The Corsair F4U is heavily armed, and I had fun building and painting the various missiles and bombs (with varying degrees of success):

 

I hand brushed Testors Burnt Iron for the cylinder heads and I liked the effect (Yes: I probably should have dusted her off before taking pics):

I'm pretty satisfied with the final product:

From the front, showing off the infamously massive 13-1/2 foot Hamilton Standard prop:

In conclusion, I had a lot of fun building this Corsair. The 1:48 was a much more agreeable scale to my skill level. In consideration of my space requirements and talent level I decided at this point to stick with the scale. For whatever reason, I actually enjoyed overcoming some of the minor obstacles I encountered on this build. I was excited to figure out a fix for the window. I didn't let the wing problems get the better of me, because things break, and this ain't going in a museum.

I struggled with painting the "frame" supports on the canopy, but it taught me that I needed better tools and I now own a fine set of size 0 and similar brushes for all sorts of detail work. I've noticed since this build that my knowledge grows exponentially with each project.

I screwed up the decals and selected a poor choice of paint color. I'm over it. I had a lot of fun building this one and it still looks great on the shelf.

Happy building!

Jeff


While The Glue is Drying:

This guy over at ARC built this model right. And he got his wings to work!